DC Centrifugal Fan 13.5V, 100×100×25 mm 9–16V PWM Brushless Ball-Bearing Fan for Automotive Seat Ventilation

DC centrifugal fan 13.5V

Improving the quality of in-vehicle experience requires a reliable DC centrifugal fan 13.5V fan, featuring 9–16V wide-voltage range input power as a part of a car-grade seat ventilation cooling system. Many in-car retrofit professionals and product engineers encounter difficulties when searching for small blowers that would provide both high airflow and quiet operation capabilities in order to withstand harsh in-car environmental conditions. Traditional cooling fans do not have sufficient static pressure in order to supply airflow into thick seat foam and hence provide insufficient cooling performance despite high free-air flow rate. This 100×100×25 mm brushless centrifugal blower line addresses these common issues with a high-quality product, manufactured according to factory-grade inspection and world-class safety certification standards.

Auto-Grade 9–16V Wide-Voltage DC Centrifugal Fan, Brushless Motor Stability for In-Cabin Operation

An automotive-grade blower used for cabin operation needs to endure the voltage fluctuation caused by engine cranking, battery charge and accessories’ power. For this purpose, automotive blowers intended for use in seat ventilation need to operate stably with wide-range voltage input without stopping, speed drift or premature wear of components. Auto-grade DC centrifugal fan provides 13.5VDC nominal voltage along with full 9–16VDC operational range which matches perfectly to real-life vehicle power source parameters. Engineers have an option to choose either single-phase or three-phase open-loop brushless motors. As opposed to consumer cooling fans designed for stationary use under indoor environment, these blowers are designed for durability and operation over time with variations in temperature and vibration due to movement on the road. The entire line is subjected to a complete process of quality control inspection in terms of material checking, assembly, testing of finished products, and pre-shipment testing as per standard protocol of factory quality control procedure for export fan products with UL, TUV, CE, and CCC certification. Customers can choose between the options of automobile-quality and non-automobile-quality according to their needs.

Bearing Options that Consider Lifespan and Budget for the Project

Construction of ball bearings provides longevity of service life and excellent anti-vibration features, which are important in automotive seat applications due to the expectation of having several thousand hours of use. Ball bearings have minimal rotation friction and provide stable performance even when there is constant vibration while driving. In projects where cost and less number of running hours are important, oil impregnated sleeve bearings make an ideal option. Although sleeve bearings come at a cheaper price, their lifespan is relatively short compared to ball bearings and do not perform well under constant vibration, making them suitable for stationary and non-automotive equipment only.

DC centrifugal fan 13.5V

Low/Medium/High Blower Performance Tiers, Configurable Airflow Static Pressure and Noise for Seat Foam Resistance

One of the biggest competitive advantages of the blower fans of this automotive seat line is their ability to be configured into three different tiers: low, medium and high performance. Most competing seat cooling blowers have one fixed performance level which forces designers to balance between the amount of airflow produced and noise level. Grade L is meant for slow operation at low speeds for noise in the range 35-55 dBA. It is appropriate for luxury passenger cars because it offers gentle flow of air to remove heat from the seat surfaces and moisture without any distracting sound when driving on highways. Grade M is a balance between airflow and noise, and it is the most commonly used product for the aftermarket retrofitting. It offers constant airflow without making any noticeable noise when commuting. Grade H is meant for maximum airflow and maximum static pressure to allow fast air movement through the resistant foam material for high seating. Its airflow range is 12-32 CFM, and its static pressure is 37 mm-H₂O.

Tying Performance to Real-World Seat Applications

Total air flow varies between 8–33 CFM depending on the entire line-up. Static pressure is more important than air flow in the open when considering the design of seat ventilation systems. Flow restriction created by thick memory foam or layers of fabric is high; blowers with very high airflow but lower static pressure create practically no air movement in seat surfaces. The centrifugal fan design overcomes this issue since its air flow does not drop under the pressure exerted by cushions. The noise level of the fan increases along with the performance level from virtually silence for low-performance models to a maximum of 55 dBA in high-performance models. The project team can pick any appropriate performance grade without having to build the system for peak performance and higher noise level.

Customisable Features and Multi-Sized Portfolio for Enabling Ventilation OEM and ODM Integration

Current ventilator OEMs not only require rotation capabilities, but also fan speed monitoring and controllability and protection features to be embedded into the blower unit. Such blower system provides a number of optional additions that ease controller configuration. Variable speed control using PWM technology allows adjusting the fan speed either mimicking the preset L/M/H modes or infinitely adjusting it according to vehicle control system requirements. FG tachometer signal provides rotational speed data for ECU or external controller to monitor fan state and detect any abnormalities in its operation. Locked rotor protection protects brushless motor from any jams in the airflow caused by any foam or fabric pieces. In addition to electronic customization, mechanical customization includes the design of customized wiring harnesses, specialized connectors and custom silk-screen printing for OEM/ODM private label production. The complete range corresponds to standard forms for seats in the automotive seats industry: 9221, 10015, 10020, 10025, 11025, 12023 and 12025 blowers. The premier model of the range is the 100×100×25 mm (10025) model, which offers the best compromise between airflow capacity and size for most cushion installations. The thinner models, such as 10015 and 10020, are appropriate for thin foams, while bigger-sized 11025 and 12025 models are used where higher air capacity is required. With years of experience in production, the factory can provide custom-sample verification before mass production.

Recommendations for Installing Blow-Fans in Small Spaces

Flat-rectangular housing was developed for installation under seat cushion. Prior to deciding on the size of blower, developers need to determine the size of the cavity as well as the provision for wire connector routing. Pre-formed mountings ensure stable installation and help to prevent vibrations from being transmitted into the structure of the seats. In the event of using blow-fans in combination with foam ducts, one should strive to avoid abrupt turns and restrictions to minimize losses in static pressure and general system efficiency.

Wide Range of Applications: Blowers for Aftermarket Seat Cooling, Cooling Cushions and Compact On-Board Air Movement Solutions

Designed specifically for automotive seat ventilation solutions, the versatility of the specification range of this blowers family makes many compact cooling and air-movement applications possible. The first one is still aftermarket seat cooling installation for cars, SUVs and pickups that do not have their factory-installed ventilated seats. In this case the blower is installed inside seat cushion and pushes or pulls air through holes in the upholstery, reducing its temperature and preventing moisture buildup. Besides the automotive modifications, this centrifugal fan can be used in cooling seat cushion for stand-alone consumers as well as in cabin air-movement systems for recreational and working vehicles. Non-automotive grade units are applicable for wide variety of non-automotive compact cooling-air movement appliances, such as small equipment cooling, portable air-moving units and many others. Splitting the automotive grade units and non-automotive grade ones enables product developers to match their components to end-use specifications and pricing without paying extra money for automotive-grade qualification of non-automotive-use equipment.

Comparison of Centrifugal Blower and Axial Fan in Seat Cooling Systems

In many cases, purchasers tend to compare centrifugal fans and axial fans while developing seat-venting products. Though axial fans create a significant open-area flow rate, static pressure declines abruptly when air has to move through foams, fabrics, and ducts. Centrifugal fans have higher static pressures, which is a performance feature that becomes crucial for moving the air across the layers of the seating materials. This is why professionals prefer centrifugal fan designs in automotive seat-ventilation systems rather than the use of axial fans. Despite the fact that centrifugal fans are slightly thicker compared to thinner axial counterparts, various sizes of compact centrifugal fans can become a solution to this problem.

DC centrifugal fan 13.5V

Conclusion

Designing efficient, silent, and long-life car seat-ventilation system is entirely dependent on choosing a centrifugal fan meeting the standards of voltage endurance, static-pressure goals, available space for mounting, and noise. With its 13.5V voltage capacity, 9–16V range for working conditions, three types of performance levels, option for PWM and FG feedback, as well as full-range of sizes, this brushless blower series solves practically all engineering problems that arise while designing automotive seat cooling systems. Regardless of whether it is for after-market kits, OEM seating projects, or non-automotive small ventilation devices, dual-bearings and adjustable options make up flexible engineering choices for manufacturers. Combining high-static-pressure flow, silence, and durability in a small volume, this line of blowers provides constant performance for constrained space air-moving projects. Cooling Fan Manufacturer & Supplier | Shenzhen Rengang offers reliable blower-solutions for worldwide automotive ventilation projects.

Frequently Asked Questions

What is the range of voltage at which this DC centrifugal fan works?

This blower has a rated voltage of 13.5VDC, and its input voltage range is 9VDC to 16VDC. Such a range allows this blower to operate efficiently in case of any voltage fluctuation during vehicle operation and charging of the battery.

How do L, M and H grades differ in function?

The low-grade L aims at minimizing noise output, whereas the medium-grade M combines good airflow and noise output and is suitable for general applications. The high-grade H provides maximum static pressure and flow in order to blow air through highly resistant seat foam. Airflow range starts from 8 CFM and goes up to 33 CFM, while noise output varies between 35 dBA and 55 dBA.

Are PWM speed control and FG speed feedback functions offered for these blowers?

Yes. PWM speed control, FG rotational speed feedback and locked rotor protection for motor are offered as options for custom configured models. Custom wire harness assembly, application specific connectors and silk screen markings are also available for OEM/ODM projects.

What are the physical sizes available in this blower range?

Available sizes of blowers include 9221, 10015, 10020, 10025, 11025, 12023 and 12025. The 100x100x25 mm (10025) model is the most prominent size which is mainly used for automotive seat ventilation modification.

Which type should the project designer select, ball-bearing or oil-sleeve-bearing design?

Ball-bearings provide an extended lifespan and enhanced anti-vibration properties, and are best suited for use in automotive seat-ventilation project applications. An inexpensive alternative is provided in oil-sleeved bearing for non-automotive stationary low-vibration project applications.

Are there blower designs available both for automotive applications and non-automotive applications?

Both types are available. Blowers designed for automotive applications have to comply with more stringent environmental conditions for usage in vehicle applications. Non-automotive blowers are best suited for in-door or non-vehicle compact ventilation systems.

Leave a Message
We will call you back soon!